I just finished up a big fine art print job for a local client here in Santa Fe, New Mexico. This order included both Limited Edition and Open Edition prints, which were printed at 16×24 inches all the way up to 40×60 inches. In the process of printing the larger prints, I was blown away...
To get the ball rolling for the fall holidays, I am happy to announce a 50% off sale on all of my fine art prints until November 30th, 2013. How this works is very simple, just take 50% off my standard fine art print pricing, which can be found here, and contact me to order...
I am happy to announce a Limited Edition series of fine art archival pigment prints as well as an Open Edition series of fine art prints. For the Limited Edition fine art prints I have chosen thirty of my best-known images. The Open Edition encompasses any and all of my other images. Pricing for each...
Michael, thank you so much for sharing your experience. I bought a d800e and am planning to get a 44 inch printer and will probably go with the Epson 9880. One question is, the RAW file from the camera is 7360 pixels wide. If I divide that by 60 inches, I get 122 pixels per inch. How do you manage to get 180 pixels per inch?
And thanks for the info on paper selection and comparing PS and LR! I look forward to getting into my own learning curve!
So far, I haven’t had the need to print anything that large, but I am so glad to hear the good news about the quality! I am still a beginner with the D800, but really am enjoying it. (I went from the D7000 to the D800.)
Even though I know the basic elements to sharp photos, I was wondering if you could offer any other advice to ensure the sharpest photo possible.
Thank you!
Patricia
Mark – To get to 180 pip, I upres the image in Photoshop using Bicubic Smoother (Enlargement). This up samples the image to 60 inches. And that is why I say in the post that I only had to upres the image 147%. I use 180 pixels because the Epson printers produce the best possible image quality at 360 ppi or 180 ppi.The difference between these two resolutions is extremely small and you would need a loupe to really see it. I don’t print at resolutions lower than 180 ppi. Hope this answers the question.
Patricia – To get the sharpest photos possible with the D800, concentrate on holding the camera steady or use a tripod. Also, crank the ISO up and use higher than normal shutter speeds to assure crisper images. There is a whole lot that goes into this and I teach a workshop on getting the best image quality out of the D800 so you might look into that if you really want to squeak out all that the D800 has to offer. Here is a link to that workshop:
http://www.santafeworkshops.com/photography-workshops/workshop/1269
Thank you, Michael. I’ll take a look.
Hi Michel, firt, thanks a lot for this. It might help me a lot! I know this post was written about 3 years ago, but, if you are still online here, I would like to ask if you have any idea about comparing an enlargment from a 6×6 scanned film image, lets say, from an Hasselblad to the Nikon 800D? I will need about 40×40′ prints. Thanks.
Yoram – Glad to hear that was useful. as for the prints from he D800 vs. the Hasselblad that will depend mostly on your film scanner. The D800 will look incredible if you use good camera technique and the image is sharp. The Hasselblad film scan will look great as well but will have a lot more grain since at that size you will see the film grain and it will depend on what type of film it was shot on and how much post-processing was done to the film scan afterwards as to how these will compare. No way to tell until you make two prints and see for yourself really. My guess is the D800 will look cleaner and possibly sharper as film was never really tack sharp (if you scan it as a high enough resolution you will find this out).